Assembly Videos
Custom Designs & More
Where Do I Begin?
- Air compressor
- Pneumatic Staple Gun/Brad Nailer w/1″ fastener
- Wood glue (Titebond)
- Bucket of water
- Towel
- Sanding block
- Sandpaper
- Tape measurer
- Clamps
- Hammer
- Rubber mallet
- Impact gun with Phillips bits
- Drill with self centering & assorted bits
- 1/2-inch chisel
- Framing square
- Blanket (to avoid scratching)
How to Assemble your RTA Cabinets
Ready to assemble your cabinets? Be sure to watch these how-to videos.
Note: Delivery Day Tips and Prepping Cabinet Parts are essential to watch before you begin the assembly process.
Delivery Day Tips
Is today delivery day? Here’s how to prepare.
Tools Needed to Assemble
Watch this video to ensure you have all of the tools to successfully assemble your cabinets.
Opening a Cabinet Box
Opening a wall cabinet or base cabinet? Here’s how.
Prepping Cabinet Parts
This is important to watch prior to gluing and assembling to avoid mistakes.
Tight Male Dovetail Work Around Options
Need to work around a tight male dovetail? Here’s how.
Assembling a Wall Cabinet
Assembling a wall cabinet? Here’s how.
Assembling a Base Cabinet
Assembling a base cabinet? Here’s how.
Assembling a Linen, Pantry, or Utility Cabinet
Building a linen, pantry, or utility cabinet? Here’s how.
Assembling a Wall Pie Cut Cabinet
Assembling a wall pie cut cabinet? Here’s how.
Installing Toe Board Backer
Applying a toeboard backer to the toe-kick area of the cabinet? Here’s how.
Installing Cleats, Slides, and Front Clips
Building an adjustable ladder system for a roll-out try? Here’s how.
Installing Rear Brackets for Any Drawer Base
Building a multiple drawer-based cabinet? Here’s how.
Installing Overlay Doors & Drawer Fronts
Hanging doors and drawer fronts? Here’s how.
Installing Adjustable ROT System in Base Pantry, Linen, or Utility Cabinets
Removing shelves and adding roll-out trays to a cabinet? Here’s how.
Clamping a Flush Side of a cabinet
Clamping the flush side of a cabinet? Here’s how.
Relocating a Custom 3 drawer Front Frame rear bracket
Need to relocate a custom 3 drawer front frame rear bracket? Here’s how.
Installing Inset Hinge Brackets
Installing inset hinge brackets? Here’s how.
Installing Inset Drawer Mounting Brackets
Installing front inset drawer slide mounting brackets? Here’s how.
Matching Interior With An Off Species Wood Choice
Matching interior with an off specie wood choice? Here’s an informational video.
Applying End Skins for Finished Sides With An Off Species
(Step 1)
Applying end skins for finished sides with an off species? Here’s how.
Applying End Skins for Finished Sides With An Off Species
(Step 2)
Applying end skins for finished sides with an off species? Here’s how.